Industrial Grey Metal Queen Bed Frame with Wooden Platform Base

what our customer say this product:

Powered by

1. Erica R Verified Buyer – 26 June 2024

   Easy to assemble! Such a well thought out design. It is heavy metal. The frame is super sturdy and does not make any noise. Looks like I will have this frame for a long time.

   

2. Randaman Verified Buyer – 30 June 2024

   This bed frame is well designed and well manufactured. The parts fit! Only one screw hole had a burr in it and I was able to carefully ream it out with a Phillips bit. The manual is well written ​​except for the last two steps. 1. Placement of cross members. ( Don’t worry about the little plastic pieces​, “buckles”, until later. ) The ​first goal is to insert the cross members between the side rails.​ All of the cross members, “K”, should be securely in place before proceeding to step 2. In order to do this, one side rail must be loose​ned in order to accommodate the length of cross members. In addition, cross members must be placed in order starting at the midpoint of the frame and working towards the head or foot of the bed, respectively. This allows for the necessary width between bed rails for sequential placement of the cross members. As each cross member is placed sequentially, the distance between left and right side rails gradually decreases until all the cross members for the top half or bottom half of the bed frame , respectively, are in their proper place. The trick is to keep each cross member in place while fitting the next one. When all the cross members are in, ​and side rails are again tightened, you are ready for the last step. 2. Inserting ​t​he buckles on each end of all cross members. The manual gives a brief instruction but the graphic and instructions need additional information. Notice the shape of the square holes in the side rails. They are square with a notch at the bottom. (p. 8, Fig. 1 & 2) Notice that when the cross member “K” is properly fitted, the bottom of “K” is flush with the bottom of the rail. It may be necessary to jiggle the cross member back and forth until it is properly seated. Take a good look at one of the little ​b​lack buckles. Notice the slot at the bottom.​ (p.3, Fig.”L”) This slot needs to straddle the top of the flat end of the cross member​, K. Also notice the ​top of the barbed flanges. This part needs to fit into the ​top of the square hole in the side rail. ​With the buckle positioned at a 45′ angle, it must then be squeezed into the hole until the flanges are inside the hole and hooked inside the wall of the hole​. Pliers are helpful! Protect the outside of the rail from scratches. I tried to other add photos here but no go. See pages 3 and 8 of the manual. The bottom notch of the buckle must straddle the top of K while the top of the barbed flanges must be inserted into the top of the square hole. With K fully seated, place the plastic “buckle” atop K at a 45′ angle, / , and with the top of the flanges entering the top of the square hole. With fingers or pliers press the buckle into the hole until the barbed flanges SNAP into place.

   

3. Our Magical Journey Verified Buyer – 2 January 2025

   Recently purchased this bedframe to replace an old wooden frame I had. Assembling was fairly straight forward. The small plastic pieces they give you to place between the supports to “make the frame quiet” are useless though. Whenever the mattress rubs against them, they pop loose. You pop however many back in, and the second you sit back down on the bed, the ones under your pressure-point pop out again. And yes, they are in correctly. So it’s essentially a good value for the money, but its definitely not quiet. Especially during.. you know what lol. I’ll probably be getting rid of this and grabbing a better frame. But if you’re a college student on a budget, it’s a good buy.

   

4. Kyle Buchheister Verified Buyer – 13 January 2025

   Went together very easy and quick with 2 people Looks nice and is made of good material. Had a small dent on the metal part of the footboard that I noticed after it was already put together.

   

5. NM Mama Verified Buyer – 20 February 2025

   This bed frame is exactly what I wanted. It went together easily by myself, maybe an hour total. It is very sturdy & makes no noise whatsoever. My mattress doesn’t move an inch either.

   The frame looks like the pictures & has a low profile, which makes the room feel bigger. The low profile doesn’t make the bed awkward to use, though. Under bed storage is a little awkward due to foot placement, so even though there’s technically more space under it than my old full-sized bed, I can only store 2 roller tubs under this as opposed to the 3 under my other bed. This is only a minor inconvenience.

   The bed LOOKS medium- to high-end despite the low price point. As soon as you touch the faux wood, it’s clearly cheap, but that’s irrelevant since it looks so nice.

   I’m very pleased with this purchase & glad I waited until the seller had it available again. Definitely recommend.